CCS-COMM_BOARD/main2.cpp

// Some comments about author
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#include "DSP2833x_Device.h"
#include "DSP28x_Project.h"         // Device Headerfile and Examples Include File
#include "DSP2833x_Examples.h"
// #include "Protocol/CAN.h"
// #include "Protocol/CAN_data.h"
// #include "Protocol/DigitalIO.h"
#include "Periphery.h"

// #include "DSP28335/GPIO.h"

#include "DSP28335/SCIB.h"
#include "DSP28335/SCIBase.h"

// #include "MODBUSRTU/ModbusRTUCRC.h"
// #include "MODBUSRTU/ModbusRTUDefines.h"
// #include "MODBUSRTU/ModbusRTUTransceiver.h"
// #include "MODBUSRTU/ModbusRTUVariant.h"
// #include "MODBUSRTU/ModbusRTUTransceiverBase.h"

// #include "DSP28335/MeasureTimeInterval.h"

// #include "WEINBUS/HeaderWeinbus.h"



//Functions declarations
void idle_loop(void);

interrupt void cpu_timer0_isr(void);
interrupt void cpu_timer1_isr(void);
interrupt void canb_isr(void);
interrupt void canb_box_isr(void);

Periphery periphery;

//----------------------------------------------------------------------------------------
// DSP28335::SCISetup              SCIbSetup;
// DSP28335::SCIB                  scib(ScibRegs);

// DSP28335::MeasureTimeInterval   interval_measure(CpuTimer2);

// MODBUS RTU - PORT & HMI
// MODBUSRTU::ModbusRTUTransceiverSetup modbus;
// MODBUSRTU::ModbusRTUCRC     crc;
// MODBUSRTU::ModbusRTUTransceiver                 modbus_port(scib, interval_measure, crc);

// WEINBUS::WeinbusSlave       hmi(crc);
// MODBUSRTU::ModbusRTUTransceiverConfiguration    modbus_port_configuration;


// // Registers to testing HMI interface
// WEINBUS::REGISTER_32 test_hmi_float_reg_400 = WEINBUS::REGISTER_32(0);
// WEINBUS::REGISTER_32 test_hmi_float_reg_401 = WEINBUS::REGISTER_32(0);
// WEINBUS::REGISTER_32 test_hmi_float_reg_402 = WEINBUS::REGISTER_32(0);
// WEINBUS::REGISTER_32 test_hmi_float_reg_403 = WEINBUS::REGISTER_32(0);
// WEINBUS::REGISTER_32 test_hmi_float_reg_404 = WEINBUS::REGISTER_32(0);
// //<>

// void test_init_hmi_buffers();
void clear_array(uint16_t *pointer, uint16_t sizearray);
//----------------------------------------------------------------------------------------

volatile Uint16 infCounter = 0;
volatile Uint16 canISRcounter = 0;
volatile Uint16 canBoxISRcounter = 0;
volatile Uint16 testCounter = 0;

volatile bool init = true;
volatile bool startTX = false;
volatile bool update = false;
volatile bool sendRemote = false;

Uint16 modbusInit = 0;
int32 testVar = 0;

float test = 55;

void main()
{
    ServiceDog();
    DisableDog();

    InitSysCtrl();

    DINT;

    InitPieCtrl();

    IER = 0x0000;
    IFR = 0x0000;

    InitPieVectTable();

    EALLOW;
    PieVectTable.TINT0 = &cpu_timer0_isr;
    PieVectTable.XINT13 = &cpu_timer1_isr;
    PieVectTable.ECAN0INTB = &canb_isr;
    PieVectTable.ECAN1INTB = &canb_box_isr;
    EDIS;

    InitCpuTimers();
    ConfigCpuTimer(&CpuTimer0, 150, 1000);  // 1ms
    ConfigCpuTimer(&CpuTimer1, 150, 5000);  // 5ms

    IER |= M_INT1;  // Enable CPU Interrupt 1
    IER |= M_INT9;  // Enable CPU Interrupt 9
    IER |= M_INT13; // Enable CPU Interrupt 13

    PieCtrlRegs.PIEIER1.bit.INTx7 = 1;
    PieCtrlRegs.PIEIER9.bit.INTx7 = 1;  // from 5 to 8
    PieCtrlRegs.PIEIER9.bit.INTx8 = 1;

    periphery.config();

//----------------------------------------------------------------------------------------
    // SCIbSetup.config.baudrate = SCIB_BAUDRATE_DEFAULT;
    // SCIbSetup.config.parity   = SCIB_PARITY_DEFAULT;
    // SCIbSetup.config.stopbits = SCIB_STOPBITS_DEFAULT;
    // SCIbSetup.config.lenght   = SCIB_LENGHT_DEFAULT;
    // SCIbSetup.gpio_setup      = SCIB_GPIO_SETUP_DEFAULT;

    // modbus.gpio_re_de_setup = &DSP28335::GPIO::gpio_scib_re_de_setup;
    // modbus.gpio_driver_enable = &DSP28335::GPIO::gpio_scib_re_de_set;
    // modbus.gpio_receiver_enable = &DSP28335::GPIO::gpio_scib_re_de_clear;

    // scib.setup(SCIbSetup);

    // interval_measure.set_magic((Uint32)0);
    // interval_measure.reset();

    // modbus_port.setup(modbus);
//----------------------------------------------------------------------------------------

    // Enable global Interrupts and higher priority real-time debug events:
    EINT;   // Enable Global interrupt INTM
    ERTM;   // Enable Global realtime interrupt DBGM

    periphery.updateVersionFPGA();

//----------------------------------------------------------------------------------------    
    
    // MODBUS RTU
    //
    // modbus_port_configuration.node_id         = 0x5;
    // modbus_port_configuration.config.baudrate = DSP28335::BR9600;
    // modbus_port_configuration.config.parity   = DSP28335::NO;
    // modbus_port_configuration.config.stopbits = DSP28335::ONE;
    // modbus_port_configuration.config.lenght   = DSP28335::LEN8;
    //
    // test_init_hmi_buffers();
    periphery.test_init_hmi_buffers();

    // modbus_port.configure(modbus_port_configuration);

    // clear_array((uint16_t *)hmi.rxStack, sizeof(hmi.rxStack)/sizeof(uint16_t));
    // clear_array((uint16_t *)hmi.txStack, sizeof(hmi.txStack)/sizeof(uint16_t));

    // modbus_port.setRXBuffer((uint16_t*)hmi.rxStack, &hmi.rxLength);
    // modbus_port.setTXBuffer((uint16_t*)hmi.txStack, &hmi.txLength);
    periphery.setModbusBuffers();
    periphery.addInputRegFloat(5, test);

    // interval_measure.set_magic(19);

//----------------------------------------------------------------------------------------

    CpuTimer0.RegsAddr->TCR.bit.TSS = 0;
    CpuTimer1.RegsAddr->TCR.bit.TSS = 0;

    idle_loop();
    //
}//end main()
//
//

void idle_loop()
{
    while (true)
    {
        infCounter++;

        if (!periphery.isModbusInit()){
            periphery.receiveModbusParameters();
            // modbus_port.configure(modbus_port_configuration);
        }

        //
        // MODBUS RTU HMI Service
        //
        if (periphery.isModbusInit()){
            periphery.modbusExecute();
            // if(modbus_port.compare_state(MODBUSRTU::BREAK))
            // {
            //     modbus_port.port_reset();
            //     //
            // }
            // else
            // {
            //     modbus_port.execute();
            //     hmi.execute();
            //     //
            // }//if else
        }
        //<>
    }//end while

}//end idle_loop()


interrupt void cpu_timer0_isr(void)
{
    periphery.processDigitalOutput();

    PieCtrlRegs.PIEACK.all |= PIEACK_GROUP1;
}//end


interrupt void cpu_timer1_isr(){
    CpuTimer1.InterruptCount++;

    periphery.processDigitalInput();
}


interrupt void canb_isr(void){
    canISRcounter++;

    CANGIF0_REG CANGIF0_SHADOW;
    volatile Uint32 resetBit;

    CANGIF0_SHADOW.all = ECanbRegs.CANGIF0.all;

    if (CANGIF0_SHADOW.bit.WLIF0){
        resetBit = 256;
        ECanbRegs.CANGIF0.all = 256ul;
    }

    if (CANGIF0_SHADOW.bit.EPIF0){
        ECanbRegs.CANGIF0.all = 528ul;
    }

    PieCtrlRegs.PIEACK.all |= PIEACK_GROUP9;
}

interrupt void canb_box_isr(void){
    canBoxISRcounter++;

    // Just example
    //
    // volatile Uint32 boxNumberIsr;
    // boxNumberIsr = ECanbRegs.CANGIF1.bit.MIV1;

    // CANRMP_REG temp;
    // temp.all = 0;
    // temp.all = 1ul << 27;

    // ECanbRegs.CANRMP.all = temp.all;

    // MODBUS_COMM_CPU_Message27.mdh.all = ECanbMboxes.MBOX27.MDH.all;
    // MODBUS_COMM_CPU_Message27.mdl.all = ECanbMboxes.MBOX27.MDL.all;

    // temp.all = ECanbRegs.CANRMP.all;
    // if (temp.bit.RMP25){
    //     temp.all = 1ul << 25;
    //     ECanbRegs.CANRMP.all = temp.all;

    //     MODBUS_COMM_CPU_Message25.mdh.all = ECanbMboxes.MBOX25.MDH.all;
    //     MODBUS_COMM_CPU_Message25.mdl.all = ECanbMboxes.MBOX25.MDL.all;
    // }

    PieCtrlRegs.PIEACK.all |= PIEACK_GROUP9;
}

// void test_init_hmi_buffers()
// {
//     //
//     // hmi writeable registers
//     hmi.inputRegisters.set(WEINBUS::INPUTREGISTERS, 400);
//     hmi.inputRegisters.add( 0, &test_hmi_float_reg_400.f);
//     hmi.inputRegisters.add( 1, &(float&)test_hmi_float_reg_401.f);
//     hmi.inputRegisters.add( 2, &(float&)test_hmi_float_reg_402.f);
//     hmi.inputRegisters.add( 3, &(float&)test_hmi_float_reg_403.f);
//     hmi.inputRegisters.add( 4, &(float&)test_hmi_float_reg_404.f);
//     //
//     // hmi readable registers
//     hmi.outputRegisters.set(WEINBUS::OUTPUTREGISTERS, 400);
//     hmi.outputRegisters.add( 0 , &(float&)test_hmi_float_reg_400.f);
//     hmi.outputRegisters.add( 1, &(float&)test_hmi_float_reg_401.f);
//     hmi.outputRegisters.add( 2, &(float&)test_hmi_float_reg_402.f);
//     hmi.outputRegisters.add( 3, &(float&)test_hmi_float_reg_403.f);
//     hmi.outputRegisters.add( 4, &(float&)test_hmi_float_reg_404.f);
//     //
// }//
// //

void clear_array(uint16_t *pointer, uint16_t sizearray)
{
    static uint16_t *p_array = 0;
    static uint16_t size_array = 0;

    p_array = pointer;
    size_array = sizearray;

    while(size_array--)
    {
        *p_array++ = 0;
    }
    //
}//