DVRLastVersionsCompare/dvr_main.cpp

/*****************************************************************************
 * File Name:app_main.c
 * Author:ZD
 * Brief:
 * Note:
 * Last Updated for Version:1.0
 * Date of the Last Update:18-06-2020
 *****************************************************************************/


#include <math.h>
#include <stdint.h>

#include "framework.h"

#include "F28335/Flash2833x_API_Config.h"
#include "F28335/Flash2833x_API_Library.h"

#include "SYSCTRL/TypeControl.h"
#include "SYSCTRL/SystemControl.h"
#include "FLASH/FLASHHeaders.h"

/*****************************************************************************
 *****************************************************************************/
#include "FRAM/FRAMDATABASE.h"
#include "FRAM/FRAMDataObjects.h"
#include "FRAM/FRAMVariant.h"
#include "FRAM/ROM.h"

/*****************************************************************************
 *****************************************************************************/

float TISR = periodtriangle;
float cellVoltage[3][13];
CellState cellState[3][13];
Uint16 cellVersion[3][13];
Uint16 pwmVersion[3];
Uint32 cpu_cpld_version;


/*****************************************************************************
 *****************************************************************************/
#define TIMEINTERVALBREAKRESETMODBUS (Uint16)(100/0.4)
Uint16 endlesscounter = 0;
Uint16 endlesscounter_epwm = 0;
Uint16 counter_break_state = 0;
Uint16 counter_reset = 0;
stateHandle *state_modbus;
stateHandle *state_modbus_init;
enum MODBUS_RTU_EVENT_RS
{
    ENTYR           = 1, // state entry event
    EXIT            = 2, // state exit event
    TIMEOUT3_5CHAR  = 3, // All datagram have been received
    TIMEOUT1_5CHAR  = 4, // Interval time of each byte in datagram. Not used
    RX_READY        = 5, // SCIRXST.bit.RXRDY. Serial port received a serial data (one byte)
    TX_READY        = 6, // All datagram have been sent
    TX_WAIT         = 7  // Wait for the datagram to be sent
};
//
/*****************************************************************************
 *****************************************************************************/
//Uint16 m_readCoils[300] = {0};
//Uint16 m_writeCoils[300] = {0};
#define LENGHTMODBUSBUFFER  30
Uint16 m_readRegisters[LENGHTMODBUSBUFFER] = {0};
Uint16 m_writeRegisters[LENGHTMODBUSBUFFER] = {0};
Uint16 counter_current_faults = 0;

//Uint16 m_canData_cpu2com_coils[16] = { 0 };
//Uint16 m_canData_cpu2com_registers[50] = { 0 };
//Uint16 m_canData_com2cpu_coils[16] = { 0 };
//Uint16 m_canData_com2cpu_registers[50] = { 0 };
/*****************************************************************************
 *****************************************************************************/
//FLASH::TestFlashDataBase            default_configuration;
//FLASH::FLASHACCESS                  flash_local;
//FLASH::FLASHDATABASEConfiguration   flash_config(flash_local);
//SYSCTRL::SystemControlSetup             dvr_setup;
//SYSCTRL::SystemControlConfiguration     dvr_config;
SYSCTRL::SystemControl                  dvr_control = SYSCTRL::SystemControl();

#define MAGIC_NUMBER_TIMER1     ((Uint32)6)
#define MAGIC_NUMBER_TIMER2     ((Uint32)6)
Uint32 timer1_result = (Uint32)0;
Uint32 timer2_result = (Uint32)0;
Uint32 timer1_magic = MAGIC_NUMBER_TIMER1;
Uint32 timer2_magic = MAGIC_NUMBER_TIMER2;
void measure_timer1_reset();
void measure_timer2_reset();
inline void measure_timer1_start();
inline void measure_timer2_start();
inline void measure_timer1_stop(Uint32 magic, Uint32& result);
inline void measure_timer2_stop(Uint32 magic, Uint32& result);
void WDReset(void);

/*****************************************************************************
 ******************************************************************************/


/*****************************************************************************
 ** Global Function Declare
 *****************************************************************************/
interrupt void epwm1_isr(void);
interrupt void reload_isr(void);
void service_routine();
void modbus_registers_config();
/*****************************************************************************
 ** Local Function Declare
 *****************************************************************************/
void main(void)
{
  InitSysCtrl();
  InitEPwm();
  DINT;

  InitPieCtrl();

  IER = 0x0000;
  IFR = 0x0000;

  InitPieVectTable();
  EALLOW;
  PieVectTable.EPWM1_INT = &epwm1_isr;
  PieVectTable.USER1 = &reload_isr;   //User defined Interrupt
  EDIS;

  InitCpuTimers();
  ConfigCpuTimer(&CpuTimer0, 150, TISR);

  EALLOW;
  SysCtrlRegs.PCLKCR0.bit.TBCLKSYNC = 0;
  EDIS;
  InitEPwm1();
  InitEPwm5();
  InitEPwm6();
  EALLOW;
  SysCtrlRegs.PCLKCR0.bit.TBCLKSYNC = 1;
  EDIS;
// symbols are created by the linker. Refer to the F28335.cmd file.
  MemCopy(&RamfuncsLoadStart, &RamfuncsLoadEnd, &RamfuncsRunStart);
// Call Flash Initialization to setup flash waitstates
// This function must reside in RAM
  MemCopy(&MainLoopLoadStart, &MainLoopLoadEnd, &MainLoopRunStart);

  // Copy the Flash API functions to SARAM
  //MemCopy(&Flash28_API_LoadStart, &Flash28_API_LoadEnd, &Flash28_API_RunStart);

  DINT;

  Flash_CPUScaleFactor = SCALE_FACTOR;

  InitFlash();

//  flash.setup(SECTORH, (Uint16*) 0x300000, (Uint16*) 0x307FFF);

  IER |= M_INT3;
  PieCtrlRegs.PIEIER3.bit.INTx1 = 1;

  Gpio_setup1();

  InitXintf();

  InitECanGpio();
  InitECan();

  InitSci();

  InitEQep1Gpio();
  EQep1Regs.QDECCTL.bit.QSRC = 00;
  EQep1Regs.QDECCTL.bit.XCR = 0;
  EQep1Regs.QEPCTL.bit.FREE_SOFT = 2;
  EQep1Regs.QPOSMAX = 0xffffffff;
  EQep1Regs.QEPCTL.bit.QPEN = 1;
  EQep1Regs.QPOSCNT = 0x00000000;

  frameworkDataInit(); // Initialize global Variable

  etmp.signal=0;
  modbusCtor(&modbusHMI,eBufferHMI, &modbusHMIPort);
  modbusInit(&modbusHMI,&etmp);

  modbusSlaveBufferSet(
          &modbusHMI,
          OUTPUTCOILS,
          readCoils,
          sizeof(readCoils)/sizeof(Uint16),
          20); // Set to the starting address you need
  modbusSlaveBufferSet(
          &modbusHMI,
          INPUTCOILS,
          writeCoils,
          sizeof(writeCoils)/sizeof(Uint16),
          20);  // Set to the starting address you need
  modbusSlaveBufferSet(
          &modbusHMI,
          OUTPUTREGISTERS,
          readRegisters,
          sizeof(readRegisters)/sizeof(Uint16),
          310); // Set to the starting address you need
  modbusSlaveBufferSet(
          &modbusHMI,
          INPUTREGISTERS,
          writeRegisters,
          sizeof(writeRegisters)/sizeof(Uint16),
          310); // Set to the starting address you need


  measure_timer1_reset();
  measure_timer2_reset();

  dvr_control.get_hard_code_setup();
  //dvr_control.get_hard_code_configuration();
  dvr_control.upload_configuration();

  dvr_control.setup();
  dvr_control.configure();

  dvr_control.setup_hvcell();
  state_modbus_init = &modbusHMI.super.initState;

  //flash_local.setup(SECTORG, (Uint16*)0x308000, (Uint16*)0x30FFFF);
  //flash_config.register_configuration_parameters(&test_configuration);
  //flash_config.load_flash(&test_configuration);



  //framdb.read_from_fram_to_buffer();
  //framdb.register_configuration_parameters();
  //framdb.get_dafault_configuration();
  //framdb.upload_configuration();

  EINT;
  ERTM;


  //
  //  Watchdog Setup
  //
  ServiceDog();
  EALLOW;
  SysCtrlRegs.WDCR= 0x002C;
  EDIS;
  ServiceDog();


  //
  service_routine();
  //
}//end main()
//


#pragma CODE_SECTION("ramfuncs");
void service_routine()
{

    while(1)
    {
        /***********************************************************************/
        // Detect Hardware Current Cell Fault
        if((GpioDataRegs.GPADAT.bit.GPIO12 == 1) || (GpioDataRegs.GPADAT.bit.GPIO13 == 1) || (GpioDataRegs.GPADAT.bit.GPIO20 == 1))
        {
            counter_current_faults++;
            dvr_control.hardware_analog_current_fault.signal.phase_a = GpioDataRegs.GPADAT.bit.GPIO12;
            dvr_control.hardware_analog_current_fault.signal.phase_b = GpioDataRegs.GPADAT.bit.GPIO13;
            dvr_control.hardware_analog_current_fault.signal.phase_c = GpioDataRegs.GPADAT.bit.GPIO20;
            dvr_control.hardware_analog_current_fault.signal.fault = 1;
        }//if

        if(!dvr_control.hardware_analog_current_fault.signal.vs && dvr_control.hardware_analog_current_fault.signal.fault)
        {
            dvr_control.protection_thyristor_control();
            digitalOutput.all = (Uint32)dvr_control.get_digital_output();
            writeDigitalOutput(digitalOutput.all); // Write digital output
            sendControlOrder(ORDER_START);
            sendModulateData(0,0,0); // Send modulate data
            //
        }//if
        //
        /***********************************************************************/

        ECanbRx();  // Receiving communication board data
        modbusRun(&modbusHMI);      // Running MODBUS state machine

        /****************************user code*************************************/
            // Add your code here
        //measure_timer2_start();
        //measure_timer2_stop(timer2_magic, timer2_result);
        //
        // MODBUS Service
        dvr_control.modbusrtu_rubus_interface(readRegisters, writeRegisters);
        //
        if(dvr_control.additional_loop_is_active())
        {
            dvr_control.execute_additional();
            dvr_control.set_hvcell_level();
            dvr_control.get_hvcell_version();
            dvr_control.get_pwm_version();
            dvr_control.get_cpu_cpld_version();
            dvr_control.get_hvcell_state();
            dvr_control.hardware_diagnostic();
            //
        }//if
        //
        if(dvr_control.slow_loop_is_active())
        {
            digitalInput.all = readDigitalInput(); // Read digital input
            //
            digitalOutput.all = (Uint32)dvr_control.get_digital_output();
            writeDigitalOutput(digitalOutput.all); // Write digital output
            //
            dvr_control.process_digital_input(digitalInput);
            dvr_control.slow_loop_execute();
            //
            // Analog output
            setAnalogOutput2001_2005(a2001_2005);  // analog output
            setAnalogOutput2002_2006(a2002_2006);  // analog output
            setAnalogOutput2003_2007(a2003_2007);  // analog output
            setAnalogOutput2004_2008(a2004_2008);  // analog output
            //
            //
        }//if
        //
        if(dvr_control.symmetrical_calculator_loop_is_active())
        {
            dvr_control.execute_symmetrical_calculator();
            //
        }//if
        //
        /*
        for(int16_t i=0; i<LENGHTMODBUSBUFFER; i++)
        {
            m_readRegisters[i] = readRegisters[i];
            m_writeRegisters[i] = writeRegisters[i];
            //
        }//
        */
        //
        endlesscounter++;
        ServiceDog();
        /****************************user code end*********************************/
    }
}//end service_routine()
//


#pragma CODE_SECTION("ramfuncs");
interrupt void epwm1_isr(void)
{
    /**********************************************/
    endlesscounter_epwm++;
    measure_timer2_stop(timer2_magic, timer2_result);
    measure_timer2_start();
    measure_timer1_start();
    sendSynSignal();      // Send synchronization signal
    Date_ComBoard();      // Send data to communication board
    modbusTimerClick(&modbusHMI); // Run modbus timer
    //
    analogRead(&analogInput);     // analog input read
    //
    //setCellLevel(1); // Set cell level (Example 5)
    //getCellDCVoltage(1, cellVoltage); // Get cell DC voltage
    //getCellState(1, cellState); // Get cell state
    //getCellVersion(1, cellVersion); // Get cell version
    //getPwmVersion(pwmVersion); // Get pwm version
    //sendModulateData(0,0,0); // Send modulate data
    //cpuCpldVersion = (Uint16)getCpuCpldVersion();
    //cpu_cpld_version = (Uint32)getCpuCpldVersion();
    //
    // Cell operation
    dvr_control.get_hvcell_dc_voltage();

    /****************************user code*************************************/
    if(IS_PWM_DETECTED_FAULT)
    {
        // user must handle this error.
        // If pwm detected any error from cells or pwm board, this flag is set.
        // And user must lead the VFD to fault state, and call
        // sendControlOrder(ORDER_STOP) to stop cells.
        sendControlOrder(ORDER_STOP);

        // Add your code here
    }

    // Add your code here
    // DVR operation
    dvr_control.process_analog_input(analogInput);
    dvr_control.execute();
    dvr_control.send_hvcell_modulate_data();
    dvr_control.send_hvcell_control_order();
    //
    measure_timer1_stop(timer1_magic, timer1_result);

    /********* check MODBUS BREAK MODE *************************************/
    state_modbus = &modbusHMI.super.currentState;
    if(*state_modbus == *state_modbus_init)
    {
        counter_break_state++;
    }
    else
    {
        counter_break_state = 0;
    }//
    //

    if(counter_break_state >= TIMEINTERVALBREAKRESETMODBUS)
    {
        counter_break_state = 0;
        counter_reset++;
        dvr_control.inc_break_counter();
        modbusInit(&modbusHMI,&etmp);
    }
    /****************************user code end*********************************/

    EPwm1Regs.ETCLR.bit.INT = 1;
    PieCtrlRegs.PIEACK.all = PIEACK_GROUP3;
}
/*****************************************************************************
 ** No more.
 ****************************************************************************/
//
#pragma CODE_SECTION("ramfuncs");
interrupt void reload_isr(void)
{
    //
    WDReset();
    //
}//
//
#pragma CODE_SECTION("ramfuncs");
void measure_timer1_reset()
{
    //
    CpuTimer1Regs.TCR.bit.TSS = 1; // Stop CPU Timer
    CpuTimer1Regs.PRD.all = 0xFFFFFFFF;
    CpuTimer1Regs.TCR.bit.TRB = 1; // Reload CPU Timer
    //
}//
//
#pragma CODE_SECTION("ramfuncs");
void measure_timer2_reset()
{
    //
    CpuTimer2Regs.TCR.bit.TSS = 1; // Stop CPU Timer
    CpuTimer2Regs.PRD.all = 0xFFFFFFFF;
    CpuTimer2Regs.TCR.bit.TRB = 1; // Reload CPU Timer
    //
}//
//
#pragma CODE_SECTION("ramfuncs");
inline void measure_timer1_start()
{
    //
    CpuTimer1Regs.TCR.bit.TSS = 1; // Stop CPU Timer;
    CpuTimer1Regs.TCR.bit.TRB = 1; // Reload CPU Timer;
    CpuTimer1Regs.TCR.bit.TSS = 0; // Start CPU Timer;
    CpuTimer1.InterruptCount++;
    //
}//
//
#pragma CODE_SECTION("ramfuncs");
inline void measure_timer2_start()
{
    //
    CpuTimer2Regs.TCR.bit.TSS = 1; // Stop CPU Timer;
    CpuTimer2Regs.TCR.bit.TRB = 1; // Reload CPU Timer;
    CpuTimer2Regs.TCR.bit.TSS = 0; // Start CPU Timer;
    CpuTimer2.InterruptCount++;
    //
}//
//
#pragma CODE_SECTION("ramfuncs");
void measure_timer1_stop(Uint32 magic, Uint32& result)
{
    //
    CpuTimer1Regs.TCR.bit.TSS = 1; // Stop CPU Timer
    //
    result = CpuTimer1Regs.PRD.all - CpuTimer1Regs.TIM.all - magic;
    //
}//
//
#pragma CODE_SECTION("ramfuncs");
void measure_timer2_stop(Uint32 magic, Uint32& result)
{
    //
    CpuTimer2Regs.TCR.bit.TSS = 1; // Stop CPU Timer
    //
    result = CpuTimer2Regs.PRD.all - CpuTimer2Regs.TIM.all - magic;
    //
}//
//
void WDReset(void)
{
    EALLOW;
    SysCtrlRegs.WDCR= 0x0078;
    EDIS;
}
//