// TI File $Revision: /main/1 $
// Checkin $Date: August 18, 2006   13:46:35 $
//###########################################################################
//
// FILE:	DSP2833x_PieCtrl.c
//
// TITLE:	DSP2833x Device PIE Control Register Initialization Functions.
//
//###########################################################################
// $TI Release: 2833x/2823x Header Files V1.32 $
// $Release Date: June 28, 2010 $
// $Copyright:
// Copyright (C) 2009-2024 Texas Instruments Incorporated - http://www.ti.com/
//
// Redistribution and use in source and binary forms, with or without 
// modification, are permitted provided that the following conditions 
// are met:
// 
//   Redistributions of source code must retain the above copyright 
//   notice, this list of conditions and the following disclaimer.
// 
//   Redistributions in binary form must reproduce the above copyright
//   notice, this list of conditions and the following disclaimer in the 
//   documentation and/or other materials provided with the   
//   distribution.
// 
//   Neither the name of Texas Instruments Incorporated nor the names of
//   its contributors may be used to endorse or promote products derived
//   from this software without specific prior written permission.
// 
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// $
//###########################################################################

//
// Included Files
//
#include "DSP2833x_Device.h"     // DSP2833x Headerfile Include File
#include "DSP2833x_Examples.h"   // DSP2833x Examples Include File

//
// InitPieCtrl - This function initializes the PIE control registers to a known
// state.
//
void 
InitPieCtrl(void)
{
    //
    // Disable Interrupts at the CPU level
    //
    DINT;
    
    //
    // Disable the PIE
    //
    PieCtrlRegs.PIECTRL.bit.ENPIE = 0;

    //
    // Clear all PIEIER registers
    //
    PieCtrlRegs.PIEIER1.all = 0;
    PieCtrlRegs.PIEIER2.all = 0;
    PieCtrlRegs.PIEIER3.all = 0;	
    PieCtrlRegs.PIEIER4.all = 0;
    PieCtrlRegs.PIEIER5.all = 0;
    PieCtrlRegs.PIEIER6.all = 0;
    PieCtrlRegs.PIEIER7.all = 0;
    PieCtrlRegs.PIEIER8.all = 0;
    PieCtrlRegs.PIEIER9.all = 0;
    PieCtrlRegs.PIEIER10.all = 0;
    PieCtrlRegs.PIEIER11.all = 0;
    PieCtrlRegs.PIEIER12.all = 0;

    //
    // Clear all PIEIFR registers
    //
    PieCtrlRegs.PIEIFR1.all = 0;
    PieCtrlRegs.PIEIFR2.all = 0;
    PieCtrlRegs.PIEIFR3.all = 0;	
    PieCtrlRegs.PIEIFR4.all = 0;
    PieCtrlRegs.PIEIFR5.all = 0;
    PieCtrlRegs.PIEIFR6.all = 0;
    PieCtrlRegs.PIEIFR7.all = 0;
    PieCtrlRegs.PIEIFR8.all = 0;
    PieCtrlRegs.PIEIFR9.all = 0;
    PieCtrlRegs.PIEIFR10.all = 0;
    PieCtrlRegs.PIEIFR11.all = 0;
    PieCtrlRegs.PIEIFR12.all = 0;
}	

//
// EnableInterrupts - This function enables the PIE module and CPU interrupts
//
void 
EnableInterrupts()
{
    //
    // Enable the PIE
    //
    PieCtrlRegs.PIECTRL.bit.ENPIE = 1;

    //
	// Enables PIE to drive a pulse into the CPU 
    //
	PieCtrlRegs.PIEACK.all = 0xFFFF;  

    //
	// Enable Interrupts at the CPU level 
    //
    EINT;
}

//
// End of file
//