// TI File $Revision: /main/2 $
// Checkin $Date: August 14, 2007   16:32:29 $
//###########################################################################
//
// FILE:   DSP2833x_Dma_defines.h
//
// TITLE:  #defines used in DMA examples
//
//###########################################################################
// $TI Release: $
// $Release Date: $
// $Copyright:
// Copyright (C) 2009-2024 Texas Instruments Incorporated - http://www.ti.com/
//
// Redistribution and use in source and binary forms, with or without 
// modification, are permitted provided that the following conditions 
// are met:
// 
//   Redistributions of source code must retain the above copyright 
//   notice, this list of conditions and the following disclaimer.
// 
//   Redistributions in binary form must reproduce the above copyright
//   notice, this list of conditions and the following disclaimer in the 
//   documentation and/or other materials provided with the   
//   distribution.
// 
//   Neither the name of Texas Instruments Incorporated nor the names of
//   its contributors may be used to endorse or promote products derived
//   from this software without specific prior written permission.
// 
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// $
//###########################################################################

#ifndef DSP2833x_DMA_DEFINES_H
#define DSP2833x_DMA_DEFINES_H


#ifdef __cplusplus
extern "C" {
#endif

//
// MODE
//
// PERINTSEL bits
//
#define DMA_SEQ1INT 1
#define DMA_SEQ2INT 2
#define DMA_XINT1   3
#define DMA_XINT2   4
#define DMA_XINT3   5
#define DMA_XINT4   6
#define DMA_XINT5   7
#define DMA_XINT6   8
#define DMA_XINT7   9
#define DMA_XINT13  10
#define DMA_TINT0   11
#define DMA_TINT1   12
#define DMA_TINT2   13
#define DMA_MXEVTA  14
#define DMA_MREVTA  15
#define DMA_MXREVTB 16
#define DMA_MREVTB  17

//
// OVERINTE bit
//
#define	OVRFLOW_DISABLE	0x0
#define	OVEFLOW_ENABLE	0x1

//
// PERINTE bit
//
#define	PERINT_DISABLE	0x0
#define	PERINT_ENABLE   0x1

//
// CHINTMODE bits
//
#define	CHINT_BEGIN		0x0
#define	CHINT_END     	0x1

//
// ONESHOT bits
//
#define	ONESHOT_DISABLE	0x0
#define	ONESHOT_ENABLE	0x1

//
// CONTINOUS bit
//
#define	CONT_DISABLE	0x0
#define	CONT_ENABLE 	0x1

//
// SYNCE bit
//
#define	SYNC_DISABLE	0x0
#define	SYNC_ENABLE     0x1

//
// SYNCSEL bit
//
#define	SYNC_SRC		0x0
#define	SYNC_DST        0x1

//
// DATASIZE bit
//
#define	SIXTEEN_BIT    	0x0
#define	THIRTYTWO_BIT   0x1

//
// CHINTE bit
//
#define	CHINT_DISABLE	0x0
#define	CHINT_ENABLE   	0x1

#ifdef __cplusplus
}
#endif /* extern "C" */

#endif   // - end of DSP2833x_EPWM_DEFINES_H

//
// End of file
//